amorphous region
英 [əˈmɔːfəs ˈriːdʒən]
美 [əˈmɔːrfəs ˈriːdʒən]
非晶形区
双语例句
- The montmorillonite layers may occupy the amorphous region of PE, which lead to the free-volume reduce and carriers 'transition difficulty.
可能是蒙脱土片层占据了聚乙烯的无定形区，使得自由体积减少，载流子迁移困难。 - The natural fermentation mainly affected the amorphous region of the starch granule structure.
自然发酵主要作用于淀粉的无定形区，对结晶区的结构影响不大。 - The XRD results indicate that the esterification of starch mainly occurs in the amorphous region and less in the crystalline region.
XRD分析表明，酯化反应主要发生在淀粉分子非晶区，在结晶区也有一定程度的反应； - The results showed that the average dimension of crystalline and amorphous region were both changing zigzag with the block length;
结果表明，晶区和非晶区的平均尺寸都随嵌段长度增加呈锯齿形变化，先由小变大，然后降低，再随嵌段继续加长而变大； - The results showed that the molecular chains in amorphous region participated in crystallization gradually, the SAXS intensity became weak, and the structure of the fibers became dense and regular during ultra-drawing.
结果表明：随拉伸的进行，纤维非晶区中分子链逐渐参与了结晶，纤维SAXS强度减弱，纤维结构变得紧密规整； - Results show that during the spout electroanalysis corrosion process, the nanocrystallines in the amorphous region are corroded more easily than bulk metallic glass.
结果表明：在喷射电解腐蚀过程中，非晶内少量纳米级别的晶体相对于块状非晶基体较容易被腐蚀破坏。 - The effects of chlorine content in CPE and its preparation conditions such as chlorination temperature, the ratio of the chlorination degree in crystal region to that in amorphous region of polyethylene and thermal treatment conditions in chlorination on toughening of PVC were investigated.
氏考察了CPE氯含量、氯化条件如聚乙烯晶区与非晶区氯化程度比、氯化过程中热处理条件、氯化温度等对聚氯乙烯（PVC）增韧效果的影响。 - The basic method of dynamic mechanical temperature spectrum was proposed in previous papers. In this paper, our results of analysis was applied to structure studies on amorphous region of PET drawn and heat set fibers.
本文在第1,2部分文章的基础上，以经拉伸、热处理的PET纤维为对象，将动态力学温度谱分析结果应用于PET的非晶区结构的研究。 - The orientation of the moleeules and the size of amorphous region are the most important structural parameters which can effect the dyeing behavior.
纤维内大分子的取向及无定型区的大小，是影响染色性能的重要因素。本文初次试用核磁共振技术来研究纤维的活动分数与染色性能的关系。 - The DSC results showed that the PBT/ PET blend system was compatible in amorphous region, but incompatible in crystalline region.
DSC分析表明PBT／PET共混体系在非晶区相容，晶区不相容。